| 調節閥標準規范編號 | 調節閥標準中文名稱 | 調節閥標準英文名稱 |
| GB/T4213-1992 | 氣動調節閥 | Pneumaticindustrial process control valves |
| GB10869-1989 | 電站調節閥技術條件 | Specification ofcontrol valves forfossilpowerstations |
| JB/T7228-1994 | 風量調節閥 | |
| JB/T57182-1994 | 氣動調節閥產品質量分等 | |
| JB/T57218-1994(2005復審) | 氣動調節閥可靠性要求與考核方法 | |
| HG/T3237-1989 | 橡膠機械用自力式壓力調節閥 | |
| NFC46-503-1999 | 工業過程調節閥.第2-1部分:流量.在安裝條件下液體流量的截面方程 | (Industrial-processcontrol valves. Part 2-1:flowcapacity. Sizing equations for fluidflowunderinstalledconditions.) |
| NFC46-502-1993 | 工業過程用調節閥.第1部分:術語和概論 | (Industrial-processcontrol valves. Part1:control valve terminology and generalconsiderations.) |
| NFC46-506-1990 | 工業過程用調節閥.流量.流量的特性和校正的固有系數 | (Industrial-processcontrol valves.Flowcapacity.Inherent flow characteristics andrangeability.) |
| NFC46-525-1991 | 工業過程用調節閥,調節閥門的限定柵屏 | (Industrial-processcontrol valves.Controlvalvedata sheet.) |
| NFM62-301-4-2001 | 密封罩用組件.第4部分:通風和氣體清潔系統(如:過濾器和疏水閥)的安全和調節閥門以及控制和保護裝置 | (Components forcontainment enclosures - Part4:ventilation and gas-cleaning systemssuch as filters,traps,safetyand regulation valves, control andprotectiondevices.) |
| ANSI/UL144-2001 | 液化石油氣壓力調節閥的安全標準 | (Standard forSafety forPressure-RegulatingValvesfor LP Gas) |
| EN ISO5135-1998 | 聲學 在混響室中測定空調終端設備、空調終端單元、阻尼器和調節閥門的噪聲功率級 | Acoustics -Determination of sound powerlevelsofnoise from air-terminaldevices, air-terminal units,dampersandvalves by measurement in areverberation room(ISO5135:1997) |
| EN88/prA2-2001 | 入口壓力200毫巴以下的燃氣器具的壓力調節閥 修改A2 | Pressure governorsfor gas appliancesforinletpressures up to 200 mbar; AmendmentprA2 |
| prEN14129-2001 | 液化石油汽（LGP）罐壓力調節閥 | Pressure reliefvalves for LPG tanks |
| EN88-1991+A1-1996 | 入口壓力200毫巴以下的燃氣器具的壓力調節閥 | Pressure governorsfor gas appliancesforinletpressures up to 200 mbar |
| DIN V19259-2-1999 | 設備文獻.調節閥用帶分類示意圖的數據類型 | (Documentation ofdevices - Standarddataelementtypes with associated classificationfor valves) |
| DIN EN60534-6-1-1998 | 工業流程控制閥.第6部分:調節閥門驅動的位置調節器固定用安裝細節.第1節:行程驅動上位置調節器的安裝 | (Industrial-processcontrol valves -Part6:Mounting details for attachment ofpositioners to controlvalves-Section 1: Postioner mounting onlinearactuators(IEC60534-6-1:1997); German versionEN60534-6-1:1997) |
| DIN3163-1974 | 公稱壓力25的冷卻劑循環直通調節閥 | (Control throughvalves forrefrigerantcircuits,nominal pressure 25 bar) |
| DIN32730-1993 | 取暖裝置中水和蒸氣用具有安全功能的調節閥.安全技術要求和檢驗 | (Valves with asafety function for waterandsteamin heating systems; safetyrequirements and testing) |
| DIN58600-2003 | 呼吸保護器.德國消防隊用自調需氧量氧氣調節閥與獨立開路壓縮空氣呼吸器面罩之間的插塞連接 | (Respiratoryprotective devices-Plug-inconnection between lung governed demandvalve andfacepieceforself-contained open-circuit compressed airbreathingapparatusforuse by German fire brigade) |
| UL144-1999 | 液化石油氣調節閥 | (LP-gas regulators) |
| UL17-1994 | 燃油設備用通風孔或煙囪連接器調節閥門 | (Vent or chimneyconnector dampersforoil-firedappliances ) |
| JISB8387-2000 | 液壓動力.四孔調節閥門和四孔方向控制閥門.02,03,05尺寸.夾持尺寸 | (Hydraulic fluidpower -- Four-portmodularstackvalves and four-port directionalcontrol valves, sizes02, 03and05 -- Clampingdimensions) |
| IEEE1189-1996 | 固定設備用調節閥鉛酸(VRLA)蓄電池的選擇指南 | (Guide forselection ofvalve-regulatedlead-acid(VRLA) batteriesforstationaryapplications) |
